Haier ESD100 Manual Del Usario página 9

Selecting Wash Cycles
• Select the appropriate cycle based on the load
and soil level. For your convenience, the
dishwasher has Pots & Pans, Normal,
Glassware and Rinse & Hold wash cycles that
you can select from.
Pots & Pans Wash Cycle:
• This cycle is used for heavily soiled pots & pans,
I_O'I'S
& I_&I_'S
'31, b.SSWb._£
cookware, dishware, silverware and glassware items with dried-on or baked-on
soils.
Note: This cycle may not remove burned-on foods,
Normal Wash Cycle:
• This cycle is used for medium or heavily soiled dishware, glassware and
silverware,
Glassware Wash Cycle:
• This cycle is used for lightly soiled glassware, chinaware, pre-rinsed dishes and
silverware.
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later.
Note: Do not use detergent with this cycle.
Selecting Wash Option
Hi-Temp Wash:
• You can select this option with Pots & Pans, Normal or Glassware wash cycles.
Note: Do not use this option with Rinse & Hold Cycle.
Note: When this option is selected, water temperature boosts up between
161 ° F- 167 ° F. "HI-TEMP WASH" helps: kill bacteria, dissolve detergents,
remove sticky and greasy substances off the dishware and as well as
effective cleaning.
Note: Any interruption during wash and rinse cycles or if the incoming water
temperature is too low, proper water heating temperature cannot be
achieved and the Hi-Temp Wash heating temperature conditions may be
affected.