Remington I-LIGHT REVEAL Guía De Uso Y Cuidado página 16

ENGLISH
, Troubleshooting
• Always read these instructions fully before using i-Light REVEAL.
• Refer to this troubleshooting guide if you experience any problems with i-Light REVEAL, as this section
addresses the most common problems you could encounter.
• If you have followed the instructions in this section and continue to experience problems, please contact
your local Remington® Service Centre for further assistance.
Problem
The device will not switch on.
16
Possible Cause
The device isn't charged. You
should hear the device 'beep'
twice and the LCD display will
show this screen.
The Treatment head is not fully
attached. You should hear two
'beeps' and the LCD display will
show this screen.
Action
Ensure the device is fully
charged - plug the charging
cord into the wall socket. The
Battery Charging icon should
appear on the LCD display.When
the device is fully charged, the
Battery Life indicator will be full:
Ensure the Treatment Head is
properly attached to the device.
When the Treatment Head is
attached correctly, you should
hear a 'click' and the lights and
'beeping' will stop.