Tabla de contenido
Publicidad
Apéndice A
Otras Certificaciones
Certificaciones
INFORMACIONES SOBRE LAS
CERTIFICACIONES
European Directive Information
This product complies with following European Directives:
PED Directive (97/23/EC) – Pressure Equipment Directive
This product is in compliance with the directive and was designed and manufactured in accordance
with sound engineering pratice using several standards from ANSI, ASTM, DIN and JIS.
Monitoring of the Quality Management System by BVQI (Bureau Veritas Quality International) for
the certification of Management Systems.
EMC Directive (2004/108/EC) - Eletromagnetic Compatibility
The EMC test was performed according to IEC standard: IEC61326-1:2006, IEC61326-2-3:2006,
IEC61000-6-4:2006, IEC61000-6-2:2005. For use in environment only.
Keep the shield insulated at the instrument side, connecting the other one to the ground if necessary
to use shielded cable.
Authorized representative in European Community
Smar Gmbh-Rheingaustrasse 9-55545 Bad Kreuzanach
ATEX Directive (94/9/EC) – Equipment and protective systems intended for use in potencially
explosive atmospheres
This product is certified according to the European Standards at NEMKO and EXAM (old DMT). The
certified body for manufacturing quality assessment is EXAM (number 0158).
Consult
www.smar.com.br
directives and certificates.
FMEDA Report
Certifier Body: Exida
Failure Modes, Effects and Diagnostics Analysis (Report No. R02 / 11-19).
North American Certifications
FM Approvals
Certificate N: FM 4B9A4.AX
Explosion-proof for Class I, Division 1, Groups A, B, C, and D;
Dust-ignition proof for Class II, Division 1, Groups E, F, and G; Class III, Division 1; hazardous
locations.
Intrinsically Safe for use in Class I, Division 1, Groups A, B, C, and D; Class II, Division 1, Groups E,
F, and G; Class III, Division 1;
Non-incendive for Class I, Division 2, Groups A, B, C, and D
Entity parameters: V
= 30 Vdc I
max
Ambient Temperature: (-40ºC < T
Enclosure Type: 4X or Type 4.
CSA International (Canadian Standards Association)
Certificate N: CSA1111005
Class 2258 02 Hazardous Locations
Groups E, F and G; Class III, Division 1; Class I, Division 2, Groups A, B, C and D; Class II, Division
2, Groups E, F and G; Class III.
Class 2258 03 Intrinsically Safe and Non-Incendive Systems for Class I, Division 1, Groups A, B, C
e D, Class II, Division 1, Groups E, F e G, Class III, Division 1. Intrinsically Safe when connected
through CSA Certified Diode Safety Barrier, 28 V
for the EC declarations of conformity for all applicable European
= 110 mA Ci = 8nF Li = 0.24 mH
max
<+60ºC).
amb
for Class I, Division 1, Groups B, C and D; Class II, Division 1,
, 300 Ω
max
.
min
A.1
Publicidad
Tabla de contenido
