Sun Microsystems Fire 880 Manual De Montaje página 24

Attach the Tray Assembly to the Cabinet
Using the rail holes you marked in "Determine the Vertical Position of the Server in
the Cabinet" on page en-19, attach the tray assembly to the cabinet by completing
the following steps:
1. Attach the front brackets on the slides of the tray assembly to the front rails of the
cabinet.
a. With the help of an assistant, position the tray assembly on the inside of the
cabinet with the front brackets at the front of the cabinet.
To fit the tray assembly between the rails, you will need to tilt it by lowering one
side of the assembly.
en-20 Sun Fire 880 Server Rackmounting Guide • October 2001