Sun Microsystems Fire 880 Manual De Montaje página 9

2
C H A P T E R
Installing the Server Into the
Cabinet
This chapter provides step-by-step instructions for installing the Sun Fire 880 server
into a 19-inch (48.26-cm) wide EIA-compliant cabinet.
To install a Sun Fire 880 server into the cabinet, complete the following tasks in the
order listed:
Make sure you have completed the prerequisite tasks. See "Before You Begin" on
I
page en-6.
Prepare the server. See "Preparing the Server" on page en-8.
I
Prepare the cabinet. See "Preparing the Cabinet" on page en-17.
I
Install the tray assembly into the cabinet. See "Installing the Tray Assembly Into
I
the Cabinet" on page en-17.
Install the server into the tray assembly. See "Installing the Server Into the Tray
I
Assembly" on page en-23.
Make the server ready for operation. See "Restoring the Server" on page en-27.
I
Secure the tray handle to the cabinet rails. See "Securing the Server in the
I
Cabinet" on page en-28.
Install the trim strips. See "Installing Trim Strips" on page en-30.
I
Replace the front and back doors of the cabinet. See "Restoring the Cabinet" on
I
page en-31.
Develop the cable management scheme. See "Managing Cables" on page en-31.
I
en-5