Plus U3-1080 Manual Del Usuario página 28

S e t t i n g
M e n u )
Set the colors as desired in accordance
with the image contents.
Subtle color settings are possible, as desired. Setting is
possible for each input.
1
Select the image to be input (page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor / keys to select "COLOR".
3
Use the cursor
"GAMMA".
4
Use the cursor
"GAMMA".
The following can be selected.
Normal Natural
Normal is standard settings; Natural stresses
coloring; Real stresses (brightness). Custom is
used to adjust freely as desired.
5
Use the cursor
TOM", press the ENTER button to display
the sub-menu and then set the gamma
value. There are 33 index values.
Adjusting Color Balance
Color balance (white balance) can be set for each input.
1
Select the image to be input (page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor / keys to select "COLOR".
3
Use the cursor
"COLOR TEMP".
4
Use the cursor
"COLOR TEMP".
Four different types of color balance can be set
beforehand: Low, Medium, Standard and High.
When the ENTER button is pressed, the
sub-menu will be displayed to enable fine
adjustment.
N a r r o w I m a g e s
/ keys to select
/ keys to set the
Real Custom
/ keys to select "CUS-
/ keys to select
/ keys to select the
http://www.pureglare.com.au
( A d v a n c e d
Setting the Video Type
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor /
2
Use the cursor
"VIDEO TYPE".
3
Use the cursor
"VIDEO TYPE".
The following can be selected.
DVD VCR
DVD is used for DVD players and VCR is used for
normal video players.
Selecting the Color System
The following color systems can be used with this device.
NTSC 3.58
PAL PAL-M
SECAM
Only NTSC 3.58 and PAL can be used for component
video.
Selection is automatic when AUTO is used.
1
Select an input for the color system to be
selected (page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor /
3
Use the cursor
"COLOR SYSTEM" and then press the
ENTER button.
4
Use the cursor
desired color system.
E – 26
keys to select "COLOR".
/ keys to select
/ keys to set the
NTSC 4.43
PAL-N PAL60
keys to select "COLOR".
/ keys to select
/ keys to select the
To close the menu
Press the CANCEL button.