Maintenance Of The Machine; Specifications - Royal Sovereig RBC-2100 Manual De Instrucciones

MAINTENANCE OF THE MACHINE

W A R N I N G : Before doing any dusting , turn the power switch off and disconnect the power cord from the machine. It is very
important to clean all the sensors in the machine with a soft brush to avoid any paper particles or dust from sticking to the light
transmitter or the light-receiver sensors. It is important to clean the inside of the machine occasionally. Unplug the machine and
liftthetopcovertogainaccesstotheinterior.
If necessary, the glass surfaces of the detectors may also be wiped with a soft cloth dampedwith alcohol.
To get the best results out of your bill counter, Royal Sovereign recommends using Royal Sovereign Cleaning Cards (RBC-CLN) to
remove dirt, dusts, oils, and other contaminates from bill counters. With the machine on, simply run the cleaning card through the
machine like a bill. This cleaning card will run through and clean the sensors of dirt and other contaminates.Cleaningcardsare
recommendedtobeusedafterevery100cycles.
CAUTION: DO NOT CHANGE THE POSITION OF THE DETECTORS AND/OR OPTICAL SENSORS

SPECIFICATIONS

Model
Power
Power Consumption
Temperature Range of Operation
Hopper Capacity
Counting Speed
Accepted Note Size
Display Range
Dimensions
Net Weight
RBC-2100
single-phase 110~220V 50/60Hz (±10%)
<90W
0~40°C / 32~104°F
200 notes
1,000 bills per minute
4.3" × 2.0" ~ 9.8" × 7.7" / 110 × 50~185 × 90(mm)
Counting: 4 Digits / Batch Counting: 3 Digits
308 × 265 × 163 mm (12.12 x 10.43 x 6.41 in)
15.40 lbs. / 7.00kg
8