Network; Password - Carl Valentin COMPA II Manual De Instrucciones

Compa II
Key:
Synchronization at
switching on
Key:
CMI length

Network

Keys: , , ,
For more information, please see the separate manual.

Password

Keys: , , ,
Operation
Password
Key:
Protection configuration
Key:
Protection favorites
Key:
Protection memory card
Key:
Protection printing
Network
Password
Key:
Protection HTTP
Key:
Protection Telnet
110
Off: The synchronization is disabled, i.e. the measuring and label feed have to be released
manually.
Measure: After switching on the printer, the loaded label is automatically measured.
Label feed: After switching on the printer the label is synchronised to the beginning of label.
For this one or multiple labels are advanced.
If the print is interrupted in the label, at the printhead this could lead to a small interruption in
the printout, showing a fine white line onto the label. To avoid this, a value for the minimum
backfeed can be set (0 – 1 mm) at which the label material is moved backwards. At the next
print start the free range is overprinted. The setting of CMI length has only an influence at the
selection of backfeed mode 'optimised backfeed'.
,
, ,
Entering a 4-digit numeric password.
Printer settings can be changed (contrast, speed, operating mode, ...). The password
protection prevents modifications at the printer settings.
The password protection prevents the access to the favorites.
With the functions of the memory card, labels can be stored, loaded, etc. The password
protection has to decide if no access or only readable acces on CF card is allowed.
No protection: No password protection
Userview only: Only reading access
Protected: Access blocked
In case the printer is connected to a PC, it can be useful, that the user is not able to produce a
print manually. So the password protection prevents that prints can be produced manually.
Entering a 15-digit password. The password can consists of alphanumeric and special
characters.
The communication by HTTP can be avoided.
The settings of the Telnet service cannot be changed.
English