Grundig VCC 4750 A Manual De Instrucciones página 16

USAGE
_____________________________________________
Intended use
The appliance has been designed for household
use and is not suitable for industrial use.
Attaching/removing the hose
1 T o attach the hose
Q
in the arrow direction in order to match it with
the suction nozzle and rotate it clockwise.
2 T o remove the hose
counter-clockwise and pull it.
M
Attaching/removing the
telescopic tube
1 A ttach the telescopic tube
.
A
2
P ull the telescopic tube
to remove it.
3 P ush the telescopic adjustment latch
arrow direction and pull the telescopic tube
to adjust its length.
C
Attaching/removing the
parquet/carpet brush
You can install/remove the narrow end of the
telescopic tube from/to the parquet/carpet
C
brush .
E
16
ENGLISH
, push the hose cap
M
, rotate the hose cap
Q
to the handle
C
from the handle
C
D in the
Adjusting the parquet/carpet
brush
Perform the following actions on the adjustment
F
latch located on the parquet/carpet brush
Use "
7
quet.
Use "
7
A
Operation
1 P lug in the appliance after pulling the power
plug located at the back of the appliance.
2
P ress the on/off button
appliance.
Adjusting the suction power
1
Y ou can adjust the suction power using the
suction power adjustment button
on the appliance. Rotating in the clockwise
direction will increase the suction power and
in counterclockwise direction will decrease the
suction power.
2
Y ou can lower the suction power of the parquet
carpet brush by pulling backward the vacuum
adjustment control
without the need to use the suction power
A
adjustment knob
Dust indicator
Dust indicator
bag. When the indicator displays red zone more
than 50%, replace the dust bag.
" position for hard floors and par-
" position for rugs and carpets.
to switch on your
J
located on the handle
B
found on the appliance.
K
indicates the fullness of the dust
L
E
;
found
K