General Standards - AERMEC ANR Serie Manual Tecnico

• This manual and the wiring diagrams
supplied with the unit must be kept
in a dry place for possible future con-
sultation and for the entire life of the
machine.
• Be careful to adhere to the instruc-
tions in this manual and observe the
safety regulations currently in place.
• The device must be installed in com-
pliance with the local legislation
currently in force in the country of
destination.
• Non-authorised tampering with the
equipment, whether electrical or me-
chanical, will make THE WARRANTY
VOID and exclude any liability on the
part of the company.
• Check the electrical characteristi-
cs shown on the registration plate
(fig. 1 . 1 ) before making the electrical
wirings. Read the instructions in the
specific section about electrical wi-
rings.
• If the unit needs to be repaired, in all
cases contact a specialised AERMEC
aftersales centre and only use OEM
spare parts.
• The manufacturer furthermore decli-
1. 1 Technical card
NOTE:
If the identification plate is tampered
with, or removed, this prevents the
certain identification of the product,
making all installation and maintenance
operations more difficult.

GENERAL STANDARDS

1
nes any liability for any injury to per-
sons or damage to things resulting
from the failure to comply with the
information in this manual.
Any use other than that permitted or
outside the operating limits men-
tioned in this manual is forbidden if
not previously agreed with the com-
pany.
The warranty does not include pay-
ment for damage due to wrong in-
stallation of the unit by the installer.
• The warranty does not include pay-
ment for damage due to the impro-
per use of the unit by the user.
• The manufacturer does not consider
itself liable for accidents to the user
or the installer due to the incorrect
installation or improper use of the
unit.
•The device must be installed in such a
way that maintenance and/or repair
operations can be carried out. The
warranty of the device does not in
any case cover costs incurred as a re-
sult of motorised ladders, scaffolding
or any other lifting systems made
necessary to carry out the operations
under warranty.
The warranty is not valid when:
• the services and the repairs have been
carried out by non-authorised per-
sonnel or companies;
• the unit has been repaired or modi-
fied in the past with non OEM spare
parts;
• the unit has not been adequately
maintained;
• if the instructions described in this
manual have not been followed;
• if non-authorised modifications have
been made.
N.B.:
The Manufacturer reserves the right
at all times to make any modification
for the improvement of its product
and is not obliged to add these mo-
dification to machines of previous
manufacture that have already been
delivered or are being built.
The warranty conditions are any
subject to the general sales condi-
tions at the moment the contract is
finalised.
technical
card
Fig. 1
5