Operation; Start And Stop; Operating - Chicago Pneumatic CP 0044 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Operation

WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
Stop the machine immediately in all cases of
►
power supply interruption.

Start and stop

Start the concrete saw by pressing the start and stop
device release with thumb to unlock the start and
stop device.
Keep the start and stop device release pressed in and
squeeze the start and stop device using fingers, to
start the concrete saw.
Stop the concrete saw by releasing the start and stop
device. The start and stop device returns
automatically to the stop position.
16
www.CrowderSupply.com • Toll Free: 888-883-5144

Operating

WARNING Kickback hazard
Kickback of the machine and cutting blade can
happen very suddenly, when using the upper
quadrant of the cutting blade. This can result in
serious injuries or death.
Never use the upper quadrant of the cutting blade
►
when operating the machine.
Operation
Stand in a stable position and hold the concrete
♦
saw firmly with both hands.
Stand in such a way that the body is clear of the
♦
cutting attachment. Avoid standing in direct line
with the blade.
♦ Start cutting with the machine running at
maximum speed.
Cutting
♦
Support the work piece in such a way that
pinching does not take place and so that the cut
remains open while cutting.
Check that the blade is not in contact with
♦
anything when the concrete saw is started.
Ease the blade into the material being cut, never
♦
force the blade in.
♦
Move the blade slowly backwards and forwards,
using a small part of the blade's cutting edge.
This reduces the temperature of the blade and
ensures effective cutting.
♦ Be alert to movement of the work piece. Never
cut above shoulder height.
Feed down the concrete saw in line with the
♦
blade. Pressure from the side can damage the
blade and is very dangerous.
9800 0543 90 | Original instructions
CP 0044