Steinberg MR 816csx Manual Del Usario página 30

Appendix
Appendix
Specifications
Electrical Characteristics
Sample Rate
Total Harmonic Distortion
Frequency Response
(CH IN to LINE OUT)
Dynamic Range
(SN ratio at the maximum level)
Hum & Noise
(20 Hz–20 kHz)
Rs = 150 Ω
Maximum Voltage Gain
Crosstalk @ 1 kHz
Input and Output Specifications
Analog Input
MIC/LINE/HI-Z jack 1,
MIC/LINE jack 2 and MIC/LINE IN
jacks 3 – 8 (CH1 – 8)
INSERT I/O jack 1 and 2 (INSERT IN)
Analog Input
OUTPUT jacks 1 – 8 (Line Output)
INSERT I/O jack 1 and 2
(INSERT OUT)
Headphone jacks 1 and 2
(Monitor 1/2)
General Specifications
Power Requirements
Dimensions (H x D x W)
Net Weight
Operating Free-air Temperature Range
Included Accessories
30
Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz
External 44.1kHz, 48kHz, 88.2kHz, 96kHz (± 0.1% respectively)
0.004% or less (1 kHz @ +18 dB, into 600 Ω)
GAIN: Minimum
20 Hz–20 kHz, +1, -3 dB @ +4 dB, into 600 Ω
fs = 48 kHz
20 Hz–40 kHz, +1, -3 dB @ +4 dB, into 600 Ω
fs = 96 kHz
104 dB, DA converter (LINE OUT)
97 dB, AD + DA (to LINE OUT)
-118 dB, Equivalent input noise
-86 dB, Residual output noise, Output fader: Minimum
GAIN: Maximum -86 dB (90 dB SN), LINE OUT
PAD: OFF Output channel fader: Nominal, All Input channel faders: Minimum
GAIN: –60 dB -53 dB (57 dB SN), LINE OUT
PAD: OFF Output channel fader: Nominal, Input channel fader (one channel): Nominal
84 dB, CH1 – 8 to LINE OUT
GAIN: Minimum
-85 dB, CH1 – 8
Adjacent Input
Type
XLR type balanced,
+48 V Phantom powered
TRS phone type, unbalanced
Type
TRS phone type, balanced
TRS phone type, unbalanced
TRS phone type, unbalanced
Getting Started
Input Level
Nominal Level Maximum Level
–60 dBu to +10 dBu +24 dBu
0 dBu +14 dBu
Output Level
Nominal Level Maximum Level
+4 dBu +18 dBu
+4 dBu +18 dBu
4 mW + 4 mW 25 mW + 25 mW
12 mW + 12 mW 75 mW + 75 mW
40W (PA-30)
44 x 305 x 480 mm
3.2kg
+5 – +35
AC power adaptor (PA-30 or equivalent)
DVD-ROM (Cubase AI 4)
CD-ROM (TOOLS for MR)
Getting Started manual (printed booklet)
IEEE1394 cable
Rubber stoppers x 4
Input Impedance
3.5 kΩ
10 kΩ
Input Impedance
600 Ω
10 kΩ
8 Ω
40 Ω