Kreg Jig K3MS Guia De Inicio Rapido página 5

Parts
Kreg Jig
®
G
F
E
I
800-447-8638
C
B
A
J
A
Toggle Clamp:
D Secures workpieces while drilling Pocket-Holes. Use fi rm pressure to lock in place.
B Clamp Pad:
Rotate clockwise or counter-clockwise to compensate for workpiece thickness.
C Drill Guide:
The "core" of the Kreg Jig®. Can be used in the Kreg Jig® or removed for repair applications.
D Drill Guide Adjustment Markings:
Markings indicate the Drill Guide's height setting. Match with workpiece thickness.
Screw Holes (4):
E
H
To minimize movement during use, secure the jig to your workbench using 4 wood screws.
F Clamping Recess:
For a less permanent solution, clamp your jig to your workbench with a Bar or C-Clamp.
G
Drill Guide Pin:
Locks Drill Guide into place while adjusting height for different material thicknesses.
H Drill Guide Spacer Block:
For repair applications. Each spacer compensates for an additional ¼" in material thickness.
I Depth Collar / Allen Wrench:
Sets the maximum plunge depth of drill. Use Allen Wrench to lock into place on the bit.
J Depth Setting Gauge:
Helps you fi nd the correct Depth Collar setting for varying workpiece thicknesses.
www.kregjig.com