SOUNDMASTER UR8100 Manual De Instrucciones página 11

Tap the "DIMMER" (7) button to set the brightness of the LED display to high, medium, low or off
according to your ambient light conditions.
Press the night light "ON-OFF" (6) button to turn on the function.
1.
2. In order to turn off the function, press the button again.
The product functions as a charger for your mobile phone and USB device.
The connector or the USB charging cable is not supplied. (The cable length does not exceed 3m).
IMPORTANT!
When connecting your USB cable to the USB charging socket on this alarm clock please be sure
that the USB symbol on your plug is facing UP when you insert the plug into the USB charging
socket. Observe the charging indicator on your device to confirm that it is charging.
To improve charging effectiveness, please turn off and/or refrain from using your device while
charging.
Charging time will vary depending on the charging current that your device requires.
Therefore, some devices will take longer to charge than others.
If the system does not respond or exhibits erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, disconnect the AC Power Adaptor from
the wall and remove the backup battery from the compartment. Wait at least 3 minutes, and reinsert
the battery for the back-up, and reattach the AC Cord to the wall. The unit is now reset, so you will
need to setup the unit time and alarms again.
Battery backup: 3V (CR2032 Flat Lithium battery x 1)
Power Adaptor: Input AC 100-240V 50- 60 Hz
Output DC 5V 1200mA
Wörlein GmbH
Gewerbestrasse 12
D 90556 Cadolzburg
Germany
Tel.: +49 9103 71 67 0
Fax.: +49 9103 71 67 12
Email: service@woerlein.com
Web: www.woerlein.com
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
DIMMER CONTROL
NIGHT LIGHT FUNCTION
USB CHARGING FUNCTION
RESETTING THE UNIT
SPECIFICATIONS
IMPORTER
www.woerlein.com
4
UR8100 / English Instruction Manual