How The Aquaboy ® Pro Ii Works - Atmospheric Water Solutions AquaBoy Pro II Manual Del Usuario

HOW THE AquaBoy Pro II WORKS
®
4.
process in order to create
® ™
The AquaBoy Pro II is a luxury appliance that uses a 7-stage EZ-Filter
"purified great tasting water
™ " from the air.
The appliance first draws in air through the HEPA air filter which eliminates micro particles and dust
1
from entering the appliance. The water vapor in the air then comes into contact with the stainless
steel coils that have been cooled down using a compressor and coolant, converting the vapor into its
liquid form through the condensation process. The water drips into an ABS thermoplastic water tray
and then flows into a stainless steel lower tank that contains a UV lamp to eliminate bacteria and
2
microorganisms.
Using state-of-the-art micro pumps, the water is then pumped through the remaining filters, including
a sediment filter that eliminates particles over 5 microns in diameter, a pre-carbon filter containing
3 4
activated carbon and coconut shell to polish the water, an ultra fine membrane filter that eliminates
5
particles as small as .01 microns in diameter, followed by a post-carbon filter to further polish the
6
water.
The water then flows into a stainless steel upper tank containing a second UV lamp to ensure there
7
are no bacteria or microorganisms left in the water. Within the upper stainless steel reservoir, there are
two stainless steel tanks. One of these tanks heats the purified water to 180°F, while the other chills
the water to 44°F.
Flowchart (Including filter numbers)
1
7
3 4 5 6
2
www.AtmosphericWaterSolutions.com 3