Publicidad
Idiomas disponibles
Idiomas disponibles
• Reinstal! the oil fill cap or plug and tighten securely.
Do not clean engine with a forceful spray of water
because water could contaminate fuel system. With
a brush or cloth clean finger guard after every use to
prevent engine damage caused by overheating.
Service
Air Cleaner
To service pre-cleaner, wash in liquid detergent and
water. Allow to dry thoroughly before using. Do not oil
pre-cleaner. Replace if very dirty or damaged.
NOTE: Do not use petroleum
solvents,
e.g., kerosene,
which wil! cause the cartridge
to deteriorate.
Do not use
pressurized
air to clean cartridge.
Pressurized
air can
damage the cartridge.
To service air cleaner follow these steps:
I. Unscrew cover screws. Remove cover and air cleaner
assembly.
2. Remove cartiridge from cover, then retainer
(if equipped) and pre-cleaner.
NOTE: Do not use petroleum
solvents,
e.g., kerosene,
which will cause the cartridge
to deteriorate.
Do not use
pressurized
airto
clean cartridge.
Pressurized
air can
damage
the cartiridge.
3. Reassemble pre-cfeaner or retainer (if equipped.)
Place in cover with pre-cleaner mesh side toward
cartridge. Place cartridge in retainer in cover.
4. Push cover and air cleaner assembly squarely onto
base (tabs must be in slots, if equipped) and hold
firmly. Tighten cover screws securely.
RNGER
GUARD
Before running engine, clean muffler area to remove all
combustible debris.
Clean and Replace
Spark Plug
Change the spark plug every 100 hours of operation
or
once each year, whichever
comes
first. This will help
your engine to start easier and run better.
RES1STOR
Keep engine
and parts
clean!
14
Publicidad
