Mass Storage Mode; Turning On The Mass Storage Mode; Other Functions; Remote Control - Elmo QBiC X1 Manual De Instrucciones

the product and the monitor.

MASS STORAGE MODE

This product can be used as a storage device. Using this mode, you can retrieve the
data stored in the micro SD card.

TURNING ON THE MASS STORAGE MODE

1. Power off the product. Open the micro USB Port Cover of the product.
2. Connect the micro USB plug (smaller one) of the supplied USB cable to the micro
USB port of the product. Connect the USB plug of the USB cable to a USB port on
your computer.
3. Press and hold (over 5 seconds) [Power Switch].
4. The micro SD card inside the product is recognized as a removal disk. Three beep
sounds occur and the menu appears on the screen of your computer.
5. Select the menu and operate.
6. Power off the product. Remove the USB cable from the product and attach the
micro USB Port Cover.
* Make sure you attach the cover properly and completely. Insufficient attachment may
deteriorate the waterproof performance and damage the product.

OTHER FUNCTIONS

Please refer to the <QBiC instruction manual> for other functions.

REMOTE CONTROL

iOS terminal and Android terminal can be used for remote shooting control or remote
configuration of the product.
Connect first and then power on.
16