EdilKamin NANCY Instalación Uso Y Mantenimiento página 30

Ocultar thumbs Ver también para NANCY:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 59
Start-up must be carried out as prescribed by point .
standard NI
8 .
his standard indicates the control operations to be carried out
in situ, aimed at ascertaining correct system function.
You must consult the Edil amin DEALER in your area
when igniting the stove for the rst time, in order for the
stove to be calibrated according to the type of pellets and
installation conditions, thereby validating the warranty.
here may be a slight smell of paint the rst few times it is
ignited, however, this will disappear quic ly.
Before igniting you must chec :
that installation is correct
the power supply
that the door closes properly to a perfect seal
(inner righthand door).
that the combustion chamber is clean
that the display is on standby (the date, power or temperature
ashes).
o access the hopper, open the left cast iron semi-top (A -
g. ) and remove the lid underneath (B - g. ).
NANCY is designed and programmed to burn wood pellets
with mm diameter.
ellets are a type of fuel in the form of little cylinders, made
from compacted sawdust, compressed under high pressure
with no adhesives or foreign materials.
hey are sold in bags of
For the stove to function properly, you
anything else in it. sing other materials (including wood)
will render the warranty null and void. Such use is detected by
laboratory analyses. Edil amin has designed, tested and pro-
grammed their stoves to guarantee the best performance when
pellets with the following characteristics are used:
INSTRUCTIONS FOR USE
of
g.
S NO burn
g.
B
g.
If pellets with different characteristics are used, the stoves
must be recalibrated a similar procedure to that carried out by
the DEALER when the stove is ignited the rst time.
sing unsuitable pellets may: decrease ef ciency; cause
malfunctions; stop the stove from functioning due to clogging,
dirt on the glass, unburnt fuel, etc.
A simple, visual analysis of the pellets may be carried out:
smooth, uniform length, not very dusty.
with longitudinal and transverse crac s, very
dusty, various lengths and mixed with foreign matter.
- 30
-
A

Publicidad

Tabla de contenido
loading

Tabla de contenido