General Electric PBM21 Instructivo Y Advertencias página 68

6 INSTALL BOTTOM HINGE
(For models with freezer door)
6.1 Using 5/16" socket ratcher/driver, install the bottom hinge
bracket and torque the screws to 60 in-lbs and remount
the pin hinge in the opposite hole on the hinge like the picture.
7 TRANSFER THE BOTTOM COMPONENTS
ON THE FREEZER DOOR
(For models with freezer door)
7.1 Using a Torx T-20 screwdriver remove the bolts securing door
stop. Install the door stop on the opposite side.
7.2 Using a Torx T-20 screwdriver remove the plastic force closure.
Flip the plastic force closure like the picture and remount the
bolts.
CLOSURE
Bottom of door
(Left Side)
8 REHANG FREEZER DOOR
(For models with freezer door)
8.1 Lower the freezer door and make sure to insert the hinge pin
in the bottom hole of the door.
7.2
FORCE
7.1
DOOR
STOP
Bottom of door
(Right Side)
8 REHANG FREEZER DOOR
(For models with freezer door)
8.2 Straighten the door and line it up
with the center hinge bracket.
Using a 1/4" Allen screwdriver
install the center hinge pin turn
it until it extends through the
hinge bracket and into the freezer
door.
9 TRANSFER THE BOTTOM COMPONENTS
ON THE REFRIGERATOR DOOR
9.1 Using a Torx T-20 screwdriver remove the bolts securing
door stop.
9.2 Transfer the plastic thimble to the opposite hole. Install the
door stop with the plastic thimble on the opposite side.
9.3 Using a Torx T-20 screwdriver remove the plastic force closure.
Flip the plastic force closure like the picture and remount the
bolts.
Bottom of door
(Left Side)
REHANG REFRIGERATOR DOOR
10
10.1 Lower the refrigerator door and make sure to insert the
hinge pin in the bottom hole of the door.
68
(cont.)
9.3
FORCE
CLOSURE
9.2
PLASTIC THIMBLE
9.1
DOOR
STOP
Bottom of door
(Right Side)