Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HDX-SSD Quick Start Guide
I n tr oduct ion
The HDX-SSD is a network hard disk music player. It incorporates no built-in storage but requires
external network storage (a NAS drive) to be connected and configured before it can be used.
Configuring network storage is described in Section 2 of this guide.
1 I n st all and C onnect
fan
power
aperture
switch
mains input
•
Install your HDX-SSD on an equipment stand or rack intended for the purpose. Ensure that the
fan aperture is not obstructed.
Audio Output,
•
Identify the
•
Connect one or both of the
to an audio system. Set the rear panel
audio output sockets. Unless connecting to a system that includes another earthed source
component (a Naim CD player or AV processor for example), switch the rear panel
Ground
to Chassis. The
Signal Ground
through the speakers or if the audio system includes another earthed source
•
Use a standard RJ45 ethernet cable to connect the
working internet connection and a connected Network Attached Storage (NAS) drive.
•
If the HDX-SSD is to be used with an XPS or CD555PS power supply, remove the rear panel
plug
and connect the power supply using the appropriate Burndy cable. Switch on the XPS or
CD555PS before switching on the HDX-SSD. The link plug must be fitted if the HDX-SSD internal
power supply only is used.
OR CD555PS POWER SUPPLIES.
Mains Input
•
Connect the HDX-SSD
2 S wit ch On a nd Set U p
•
Ensure that the network router, NAS drive and peripheral audio equipment is connected,
switched on and working. Switch on the HDX-SSD using the rear panel
•
After a delay of approximately one minute the user interface
front panel display. The HDX-SSD display is a touch screen.
•
The HDX-SSD display language can be changed. Select
Home
Menu, followed by
Home menu by selecting the
•
In order to rip CDs the NAS drive must be enabled and given
Setup
on the
Home
menu followed by
network drives will be displayed. Select and
Full installation and operational information can be found in the HDX-SSD Reference Manual
Network,
Power Supply Link Plug
Audio Output
sockets - DIN (output 1) or Phono (output 2) -
Selectable Outputs
switch should be set to
Network
THE SXPS BURNDY CABLE ONLY MUST BE USED TO CONNECT THE XPS
using the supplied mains cable.
System
Settings,
Language,
Home
(
) symbol.
Network Shares
Enable
the desired drive.
included on the CD packed with the product, or at www.naimaudio.com
network
socket
Mains Input
and
sockets.
switch to reflect the choice of
Floating
if mains "hum" is heard
item.
socket to a network router with a
Power
Switch.
Home
menu will appear on the
Touch
items to select them.
System Setup
on the front panel
and the desired option. Return to the
Music Store
status. Select
and
Manage
Shares. A list of attached
power supply
Phono and DIN
upgrade socket
audio outputs
(link plug fitted)
Note:
Ensure that the unit
has adequate ventilation.
The ambient temperature
in the vicinity of the unit
should not exceed 35°C.
Note:
Wired network
connection is strongly
Signal
recommended for the
most consistent and
secure HDX-SSD operation.
Ethernet-over-mains
hardware may be used
and provides a simple and
convenient method of
link
home network connection.
However, the presence of
network data on the mains
supply may compromise
overall system sound
quality.
Note:
The HDX-SSD is
configured when originally
shipped not to require
any network setup but
to connect to a network
automatically. However,
if your HDX-SSD has been
previously used, its network
configuration may have
been altered, leaving
it unable to connect
automatically. Refer to
System
the HDX-SSD Reference
Manual or contact your
retailer or installer if this
appears to be the case.
English
Publicidad
Tabla de contenido
