- If the appliance turns itself off and
does not switch itself on again, dis-
connect it from the mains supply, and
wait for approximately 15 minutes
before reconnecting. If the machine
does not start again seek authorised
technical assistance.
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
- It is advisable to clean the applian-
ce regularly, as accumulated hair or
dust, especially in the filter, reduces
the product's performance and
increases the risk of fire.
- To remove the filter (G) turn it to the
left and pull it out (Fig. 2)
Anomalies and repair
- Take the appliance to an authorised
technical support service if a product
damage or other problems arise. Do
not try to dismantle or repair without
assistance, as this may be dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
Manual Alize 2000+2200 Ionic.indb 17
in the case of damage.
For EU product versions and/or in
case that it is requested in your
country:
Ecology and recyclability of the product
- The materials of which the packa-
ging of this appliance consists are
included in a collection, classification
and recycling system. Should you
wish to dispose of them, use the
appropriate public recycling bins for
each type of material.
- The product does not contain
concentrations of substances that
could be considered harmful to the
environment.
This symbol means that in
case you wish to dispose of
the product once its working
life has ended, take it to an
authorised waste agent for
the selective collection of
Waste from Electric and Electronic
Equipment (WEEE).
This appliance complies with Direc-
tive 2006/95/EC on Low Voltage and
Directive 2004/108/EC on Electro-
magnetic Compatibility.
17
12/11/10 12:46