GE Appliances GFDS175 Manual De Instrucciones página 6

Control settings.
4
5
6
7
8
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
9
6
Temp
You can change the temperature of your dry
cycle.
High For regular to heavy cottons.
Medium For synthetics, blends and items labeled Permanent Press.
Low For delicates, synthetics and items labeled Tumble Dry Low.
Extra Low For lingerie and special-care fabrics.
Level
The sensor continuously monitors the amount of
moisture in the load. When the moisture in your
clothes reaches your selected dry level, the dryer
will stop.
More Dry Use for heavy or mixed type of fabrics.
Dry Use for normal dryness level suitable for most loads. This is the preferred cycle for energy
saving.
Less Dry Use for lighter fabric (ideal for ironing).
Damp For leaving items partially damp.
Start/Pause
Press to start a dry cycle. If the dryer is running,
press it once and it will pause the dryer. Press it
again to resume the dry cycle.
Steam Refresh Cycle
For slightly wrinkled dry garments. Significantly
reduces wrinkles on up to 5 garments. After the
Steam Refresh Cycle, the unit will beep and display
"0:00." If the unit is not turned off or if the door is
not opened, the dryer will continue to tumble for
30 minutes. At the end of 30 minutes, it will display
"0:00" and the cycle will be complete.
Sanitize
This option reduces certain types of bacteria
by 99.9%, including: Staphylococcus aureus,
Pseudomonas aeruginosa and Klebsiella
pneumoniae*. The anti-bacterial process occurs
when high heat is used during a portion of the
drying cycle.
Delay Dry
Use to delay the start of your dryer.
1. Choose your dry cycle and any options.
2. Press Delay Dry. You can change the delay time
in 1 hour increments up to 24 hours, using the
Delay Dry button.
3. Press the Start/Pause button to start the
countdown.
(on some models)
NOTE: If the door is opened while the dryer is in
Delay Dry, the countdown time will not restart
unless the door is closed and Start/Pause button
has been pressed again.
NOTE: Sensor dry Level only works with
Cottons, Normal, Perm Press, Delicates,
Quick Dry, Bulky, Towels/Sheets, Dewrinkle
and Steam Dewrinkle cycles.
NOTE: A single extremely light fabric item may
need to have an additional item included to
achieve optimum results.
NOTE: Do not use this cycle on delicate
fabrics. *The Sanitize Cycle is Certified by NSF
International to NSF Protocol P154 Sanitization
Performance of Residential Clothes Dryers.