20
OPERATION
OPERATION
Before Use
Clean the refrigerator.
shipping.
Do not scratch the refrigerator with a sharp object or use a detergent that
or adhesive from the refrigerator.
on the rear surface of the refrigerator.
Open refrigerator and freezer doors to ventilate the interior.
tape from inside the refrigerator and open the refrigerator and freezer doors for
ventilation.
Connect the power supply.
Check if the power supply is connected before use.
Read the "Turning On The Power" section.
Turn off the icemaker if the refrigerator is not yet connected to
the water supply.
Plug the power plug of the refrigerator into the grounded electric outlet and then
OFF
* This is applicable only to certain models.
Running the automatic icemaker before connecting it to the water supply
may cause the refrigerator to malfunction.
Wait for the refrigerator to cool.
Allow your refrigerator to run for at least two to three hours before putting food
cooling.
Putting food in the refrigerator before it has cooled could cause the food to
spoil, or a bad odor could linger inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
CAUTION
NOTE
CAUTION
CAUTION