Setting Dosing Delay; Co Dose Log - TechGrow T-1 Pro Manual

Select >> NEXT >> to proceed with setting the dose
delay function.
Note: You can also set the pulse dosing from the set-up
menu.

8.5 Setting dosing delay

The T-1 Pro enables dosing delay. This option allows you
to determine how long the controller has to wait before
CO is dosed after detecting light in your room.
2
Select "Delay time" and adjust the delay time (up to 60
minutes).
=> Delay time 0m
Dose time Off
>> NEXT >>
Press the PTK to confirm.
Select "Dose time" to disable dose delay (Off) or to set
the dosing time.
Delay time 0m
=> Dose time Off
>> NEXT >>
Delay time 30m
=> Dose time 11h00
>> NEXT >>
Press the PTK to confirm.
Example
Lights will be on from 11:00 to 23:00 and the
"Delay time" is set to 30m.
30 minutes after the light cell has detected light,
the T-1 Pro will regulate the CO
The "Dose time" is set at 11 hours. The CO
controlled from 11:30 to (+ 11) 22:30.
When this function is enabled, the screen displays the
following:
CO2 = 950
CO2 set 700
CO2 +/- 50
Mode dawn 00:14:24
counter 00:12:25
____________________________________________________________________________________________________________________________
TechGrow | Innovative Growing Solutions
level in the room.
2
will be
2
The bottom line of your controller will alternately display
the following information:
Min 456 max 667
•
Mode dawn 00:14:24
•
CO2 counter 00:00:00
•
An hourglass appears at the top right corner indicating
that the controller is decelarating (mode dawn).
If the delay time has elapsed, this line (mode dawn) will
change into "Mode day":
Min 456 max 667
•
Mode day 10:59:24
•
CO2 counter 00:26:15
•
An asterisk appears at the top right corner indicating
that the controller is regulating.
If the dose time has elapsed, the line will change into
"Mode dusk" until the lights go off (based on the
example, this is from 22:30 to 23:00):
Min 456 max 667
•
Mode dusk
•
CO2 counter 01:56:15
•
A square appears at the top right corner.
Note: You can also set dose delay/dose time from the set-
up menu.
8.6 CO dose log
2
The T-1 Pro keeps track of the CO
dosing time and the daily dosing time.
Total dosing time CO
2
To read the total dosing time select >> NEXT >> in the
next screen:
Delay time 0m
Dose time Off
=> >> NEXT >>
Press the PTK:
Total CO2 1h08
Reset total
Reset log
>> NEXT >>
The first line shows the total (cumulative) time during
which CO is dosed.
2
dosing time: the total
2
19