Tasco Trail Cam 119422 Manual De Instrucciones página 12

Fig. 4: Selecting Parameter Settings
EXAMPLES-Changing the Settings of Some Common Parameters
Following this page, you will find tables listing all of the parameters found in
the SETUP Menu, along with their possible settings (or range of settings),
and a detailed description of what the parameter controls and what
the settings do. If you read the previous section detailing how to select
parameters and change their settings, you should be able to dive right in, find
the parameter(s) you want, and setup the camera to your preferences. But
maybe you'd rather walk through an example or two first:
To change any parameter's setting, always start with the power switch in the
SETUP position. After the LCD comes on, press the MENU key.
The first parameter you will see when you first enter the SETUP Menu is
"Mode". To change it from its default setting of "Camera" (still photos) to
"Video" (shoot video clips), press the DOWN key to select the "Video"
setting. Press the OK key to "Execute" (Set) the new setting you've selected
for this parameter.
Now press the RIGHT key to move to another parameter in the Menu.
Pressing it four times will take you to "Video Length". Try using the UP and
DOWN keys to scroll through the range of settings, then press OK to lock in
your setting for the length of each video clip the camera shoots.
12
Press MENU
(4a)
Press DOWN
(4b)
Press OK