Charging precautions:
1) The battery is not fully charged in factory, please charge before using it.
2) Charge and discharge the battery for two or three times, the battery capacity will reach the best condition. When the battery capacity is
low, please charge or change the battery.
3) The battery lasts shortly even if it is fully charged, the battery is exhausted, please contact your local dealer to buy a new authentic battery.
Installing and uninstalling of the accessories
Installing/Removing the battery
1) Align the two grooves of battery and the guide rail on the back of aluminum shell, ensuring full contact and in parallel, then push the
battery up to the radio base along the rail on the back of aluminum shell, until the battery latch locks up. (Picture 1)
2) To remove the battery, please make sure the radio is closed, push the battery latch down, and make sure the radio and battery is on the
releasing state, and then push the battery out from the radio, (picture 2)
(picture 1)
(picture 2)
Installing external headset
Reveal (do not remove) the Mic/speaker jack cover (picture 3), insert the headset into the Mic/speaker jack (picture 4).
Note:
Using the external headset will affect the water-tightness performance of radio.
EN-5