Bosch Rexroth IMpdp Instrucciones De Montaje página 4

Bosch Rexroth AG
4/16
Assembly Instructions for Profibus IMpdp and DeviceNet IMdev
These assembly instructions are part of the manual CS351.
Keep these assembly instructions always along with the manual CS351.
U
Electrical voltage!
Electrocution
- Only perform maintenance work on the tightening channel if the Compact
System has been switched off and the mains plug disconnected. Make
sure the system cannot be switched on accidentally.
- Wait until the discharging time (at least 90 seconds) has elapsed.
U
Danger of damage to property and injuries!
Measures to prevent electrostatic discharge (ESD protection) must be
undertaken to protect the module and system components during this
assembly work.
You must follow these instructions when assembling the IMpdp module and
make sure that you have a clear view of the installation location. Otherwise,
pins could become bent or contacts could be bridged, thus damaging the
module or Compact System.
► Open lock clip
► Flip the cover up
► Press both spring bolts
► Place CS351 on the rear side with the display face-up
► Loosen the four screws
Danger
Caution
on the cover.
and secure.
and remove the cover.
on the display.
IMpdp/IMdev | 3 609 929 B82/2008-04