Bosch Rexroth IMpdp Instrucciones De Montaje página 5

3 609 929 B82/2008-04 | IMpdp/IMdev
Assembly Instructions for Profibus IMpdp and DeviceNet IMdev
Version for CS351 with TFT display
► Carefully pull out the display
and move it to the side
► Fix the display with a screw
NOTICE!
Do not stress, disconnect, or jam the ribbon cable!
► Pull out the cover
NOTICE!
Proceed as described below to install the module. Otherwise, pins could become bent or
contacts could be bridged, thus damaging the module or Compact System.
► During insertion, press down on the module with one finger
carefully slide it upwards
► Tighten both locking screws
► Reassemble the display.
► Close the cover.
.
.
of the module opening
so that it firmly engages in the connection rail.
.
Bosch Rexroth AG
Version for CS351 with LTU display
► Carefully pull out the display
and move it to the side
► Carefully lay the display on the frame
and at the same time
5/16
.