KCI V.A.C Manual De Instrucciones página 21

BrIdGE AppLICATIoN wITH V.A.C.
V.A.C. SImpLACE™ drESSING
®
fig. 21
CAuTIoN: Patient's skin condition should be carefully monitored (refer to Precautions, Protect
Periwound Skin section).
1. Apply V.A.C. Spiral GranuFoam™ and V.A.C.
®
to wound as described in the previous sections. Carefully cut an approximately 2.5 cm
hole in the V.A.C.
SensaT.R.A.C.™ Pad Application section.
NoTE: Always note the total number of pieces of foam used in the wound and document
on the supplied Foam Quantity Label (fig. 5) and in the patient's chart.
2. Apply additional V.A.C.
bridge will be applied (fig. 21, fig. 22 - 3M™ Tegaderm™ Dressing application shown).
3. Cut or tear an appropriately sized piece of V.A.C.
(fig. 23).
fig. 22
fig. 24 fig. 25
fig. 27
Drape / 3M™ Tegaderm™ Dressing (not a slit) as described in the
®
Drape / 3M™ Tegaderm™ Dressing over intact skin where the
®
SImpLACE™ EX drESSING /
®
fig. 23
fig. 26
fig. 28
Drape or 3M™ Tegaderm™ Dressing
®
® Spiral GranuFoam™ for the bridge
21