Evolv Avatar RS 200W Manual De Instrucciones página 24

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

to display the set temperature. Press the button with the triangle pointing to the right or
the button with the triangle pointing to the left to reach the desired value. To confirm the
desired value, press the fire button (to switch to temperature in Celsius degrees, press the
button with the triangle pointing to the left until you reach 200 ° F, then press once again
the key with the triangle pointing left).
To disable the control of the temperature, reach 600 ° F (or 300 ° C) and press the button
with the triangle pointing to the right just once to display "OFF".
• New cartomizer: When you connect a new atomizer or an atomizer with a new resist-
ance, the display shows "NEW COIL? UP YES / DOWN NO". Press the button with the trian-
gle pointing to the right in case of new resistance or the button with the triangle pointing
to the left if the resistance is the same.
• Profiles: the DNA200 chip lets you record and select 8 different profiles. To change
profile, enter the "POWER LOCKED" mode, then press the button with the triangle pointing
to the right or the triangle pointing to the left to scroll through the 8 different profiles. To
confirm the selected profile, press the fire button.
Each profile allows you to have a series of preset values such as power, temperature of
resistance, the resistance preheating, customization of some logos and more. To determine
these settings, you need to download the free software Escribe PC SOFTWARE directly from
EVOLV VAPOR site (http://www.evolvapor.com/dna200.php) and connect the RS AVATAR
DNA200 to the PC via microusb cable.
• Cartomizer protection against short-circuit: in case of cartomizer short-circuit, the
OLED display will show "ATOMIZER SHORT".
• No-cartomizer protection: If no cartomizer is screwed to the battery of AVATAR RS
MANUAL_RS200W.indd 24
DNA200, t
• Battery
• Temper
optimal, th
show "DEV
temperatu
AVATAR R
The batter
sisting of a
(about 3,9
battery po
cartomizer
button wit
tery and a
select wat
° F). The c
The tempe
use the de
clusively b
ible with T
used with
DNA200 b
13/10/16 16:23

Publicidad

Tabla de contenido
loading

Tabla de contenido