Evolv Avatar RS 200W Manual De Instrucciones página 26

The AVATAR RS DNA200 battery is equipped with a 1A USB port and automatically recog-
nizes the charger input power.
The AVATAR RS DNA200 battery works with a 3-cell battery pack composed of lithium
polymers. Within this battery pack there is a device installed that controls each individual
cell and allows the correct charging of each cell at the same level.
During the charging process of the AVATAR RS DNA200 battery, the internal device balanc-
es the charge at its best, but no more than 4.2V.
USE OF ELECTRONIC CIGARETTE AVATAR RS DNA200
Installation - Installation of AVATAR RS DNA200 battery with a cartomizer (sold separately).
FIRST STEP
Remove the battery from the package.
SECOND STEP
Fill an empty cartomizer (sold separately) with liquid for electronic cigarettes (instructions
on recharging inside the packages of individual cartomizers).
THIRD STEP
Screw the cartomizer to the battery. The cartomizer must have a 510 connector.
In the case of different compatibility, use an adapter (sold separately).
MANUAL_RS200W.indd 26
FOURTH S
Wait 10 m
FIFTH ST
Smoke no
Operative
Press No.
activated b
down inha
switches t
position.
Replacing
When ther
electronic
CHARGIN
When the
begin flash
13/10/16 16:23