Zenner PDC Manual De Montaje Y Operacion página 12

Deutsch English
4. Wall mounting of PDC
Install wall bracket with the en-
closed wall plugs and screws
as shown below on a flat wall
surface. Slide PDC over the
wall bracket to the PDC clicks.
Dismounting of the PDC from
the wall bracket: Use screw-
driver or similar tool to push
the upper strap of the wall
bracket backwards and then
pull the PDC downwards.
Dimensions (LxlxH):
127mm x 40,6mm x 42mm
Data content (wM-Bus, M-Bus):
The PDC module can be delivered with various
data telegram.
Telegram content
Current value
Current date
Due Date value
Previous month value
Further 11 monthly values
Status information 1
Status information 2
* Data telegram according OMS Spec., typical transmission interval type A:
40 sec.; Type B: 40 sec.
** wM bus, manufacturer specific telegram; typical transmission interval 20 sec.
12
Français
A
B
C
Type Type Type
A* B* C**
✘ ✘ ✘
D
✘ ✘
✘ ✘ ✘
✘ ✘ ✘
✘
✘ ✘ ✘
✘ ✘ ✘
Italiano España
5. Radio modules
The PDC wireless M-Bus radio modules are avail-
able in T (standard), optionally and on request in S-
or C-mode.
Various data telegrams are available. The module
operate unidirectional and usually send every 20-40
seconds. Special versions are available on request
and in certain quantities.
1
40.6
Specifications PDC - radio:
Transmission mode
Encryption
Contents of the
package value
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ZENNER INTERNATIONAL GM
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ZENNER INTERNATIONAL GMBH & CO.
Transmission interval
Rev. Num.
Datum/Date Geänd./Chang. Transmission power
Freimaßtoleranzen/General tolerances
Oberfläche/Surface
DIN EN ISO 1302
Form- und Lagetolerierung/Form and
posi on tolerances
2
27
42
Transmission mode: wire-
less M-Bus unidirectional;
T1 (default); optionally:
S1, C1
AES-128 OMS (device
specific); optionally
customer specific
date, due date, monthly
value, historical monthly
values,
Status information
typically 20-40s
25 mW Beschreibung/Descrip on
Gerät
Product
Baugruppe
Subassembly
Bennenung/Descrip on
2016
Datum/Date Name/Name
3