4.4.2. Trip reset
To reset "TRIP 1" and "TRIP 2", proceed as follows.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral,
the motorbike stationary with your feet on
the ground. The display may not be
changed while driving.
4
Access the "RUN" mode; the total speedometer
("TOTAL") and partial speedometer 1 ("TRIP 1") will
appear on the display.
By pressing the "OK" key for more than three sec-
onds, the "TRIP 1" value will be reset to zero.
OPERATION
- 42 -
4