Instructions For The Installer; Data Plate; Certification; Installation-Preliminary Operations - Unox LineMiss XAF-193 Manual Del Usuario

ENGLISH
I. INSTRUCTION FOR THE
INSTALLER
Dear Customer, we would like to thank you and
congratulate you on the purchase of one of UNOX
products. The instructions and suggestions that
follow concern the phases of a proper installation,
as well as the use and maintenance for your safety
and for the best use of the appliance.
1.

DATA PLATE

MODELE DU FOUR
UNOX S.p.A.
Via dell'Artigianato, 28/30
35010 - Vigodarzere (PD) - ITALY
MOD.: XF198
S/N: 00000
PROD: gg/mm/aaaa
TYPE: kW:
0000000000000
SERIE PUISSANCE ELECTRONIC
2.

CERTIFICATION

The "CE" brand you find on our labels and on our user
manual refers to the following directives:
Electromagnetic Compatibility Directive 2004/108/EC in
accordance with standards:
EN 55014-1:2006
EN 55014-2:1997; +A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995; +A1:2001 + A2:2005
EN 61000-3-11:2000
Low Voltage Directive 2006/95/EC in accordance with
standards:
EN 60335 2 42:2003; + A1:2008 used in conjunction with
EN 60335 1:2002; + A11:2004 + A1:2004 +
A12:2006 + A2:2006 + A13 :2008
EN 62233:2008
TENSION D'ALIMENTACION
!
PATENTED
POWER: FREQUENCY:
0000000000000
CERTIFICATIONS
3.

INSTALLATION-PRELIMINARY OPERATIONS

All the electrical connections and installation
operations must be done by qualified personnel
accordino to actual laws.
3.1 CHECK THE LOCATION OF INSTALLATION
Before placing the appliance, please verify the
overall measurements and the exact position of
the electrical and water connections looking at the
pictures on the attached file "TECHNICAL DATA".
3.2 FEET ASSEMBLY
You find the feet inside the appliance. The feet must
absolutely be assembled on the oven.
Do not ever use the appliance without its feet.
Assemble the feet as showed in picture:
3.3 POSITIONING
Place the appliance respecting the safety standards
in force that you find here following described.
Place the appliance so that its back and sides can
be easily reached in order to make the electrical
connections and provide the needed service.
The appliance is not suitable for built-in installation
and side by side positioning.
It is suggested to leave a distance of 10 cm. Between
the eventual wall on the back of the oven and the
chimney.
With particular reference to the ovens, all models
must be placed upon a support, for example a
prover, a stand or on the top of a table built with
non-combustible material.
For safety reasons, tabletop appliances must only be
placed on racks or cabinets produced by the
appliance manufacturer. The maximum height of
the top shelf level is 1600 mm.
Never install the appliance on the floor.
The safety labels «max. height of the top shelf for
trays containing liquids» can be found inside the
starter kit.
After the appliance has been installed, apply the label
on a side of the appliance at a height of 1600 mm.
UNO
R
ENGLISH
3