Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Thank you for choosing one of Phonic's many quality compact
mixers. The AM440, AM440D, AM440DP and AM440W compact
mixers – designed by the ingenious engineers that have created
a variety of mixers fantastic in style and performance in the past
– displays similar proficiency that previous Phonic products have
shown; with more than a few refinements, of course. The AM
series features full gain ranges, amazingly low distortion levels,
and incredibly wide dynamic ranges, just showing the dominance
these small machines will have in the mixing World.
We know how eager you are to get started – wanting to get the
mixer out and hook it all up is probably your number one priority
right now – but before you do, we strongly urge you to take a
look through this manual. Inside, you will find important facts and
figures on the set up, use and applications of your brand new
mixer. If you do happen to be one of the many people who flatly
refuse to read user manuals, then we just urge you to at least
glance at the Instant Setup section. After glancing at or reading
through the manual (we applaud you if you do read the entire
manual), please store it in a place that is easy for you to find,
because chances are there's something you missed the first time
around.
FEATURES
●
Audiophile-quality & ultra low noise circuitry
●
4 mono mic/line channels and two stereo channels
●
EFX/AUX send on each channel
●
75Hz low-cut filter on mono channel
●
3-band EQ on each channel
●
+48V phantom power on mic channels
●
EFX/AUX send cue for monitoring individual channel
●
Balanced TRS outputs
AM440D, AM440DP and AM440W also feature:
●
32/40-bit digital stereo effect processor with 16 programs
and one main parameter control
●
Separate EFX route control
AM440DP also features:
●
Audio playback from USB flash drives
AM440W also features:
●
Bluetooth-enabled for receiving audio from all modern
Bluetooth-enabled cell phones, tablets and computers
AM440DP USB PLAYER
1.
Power on the device.
2.
Insert an appropriately formatted (FAT32) USB flash drive.
3.
Press the PLAY button to play the current track, or the <<
and >> buttons to skip forward and backwards between
tracks.
4.
The AM440DP can playback MP3 and WMA files.
5.
Use the level control for channel 7/8 to adjust the USB
player's volume.
6.
Press the STOP/MENU button to access the File Browser
(Folders) and Repeat Mode functions.
Folders – Freely navigate songs in each folder on USB flash
disc using the << and >> buttons. Press PLAY button to select,
press MENU button to go back.
Repeat Mode – There 4 repeat modes available.
No Repeat – Play each file in the current folder or root for
once.
Repeat One – Continuously repeat selected song.
Repeat Folder – Continuously repeat all the song in the
certain folder or root.
Random – Enables random playback of files in current folder
or root.
AM440 / AM440D / AM440W / AM440DP
AM440W BLUETOOTH SETUP
1.
Push the Bluetooth button to turn the Bluetooth on
2.
Enter your laptop, cell phone or tablet's Bluetooth setup
options to find the "Phonic.BT" Bluetooth device.
3.
If requested, the password for the AM440W's Bluetooth
function is 0000. A lot of modern smartphones will enter this
as the default password.
4.
Audio signals received through the Bluetooth interface will
be routed to channels 11/12 on the mixer.
5.
To reset the connection, turn your laptop, cell phone or
tablet's Bluetooth connection off and then on again.
6.
When using cell phones and tablets, it may be an idea to
turn "Airplane Mode" or "Flight Mode" on to stop phone calls
or push notifications from interrupting your audio.
Note: Not all modern Bluetooth-enabled devices allow for use of external
audio playback. In the case of laptops in particular, Bluetooth may be
used for data transmission only - depending on the model. This is a
limitation of these devices and you will not be able to use the AM440W's
Bluetooth function with these devices.
GETTING STARTED
1.
Ensure all power is turned off on your mixer. To totally
ensure this, the power supply should not be connected to
the unit.
2.
All faders and level controls should be set at the lowest
level and all channels switched off to ensure no sound is
inadvertently sent through the outputs when the device is
switched on. All levels can be altered to acceptable degrees
after the device is turned on using the channel setup
instructions.
3.
Plug any necessary equipment into the device's various
outputs. This could include amplifiers and speakers,
monitors, signal processors, and/or recording devices.
4.
Plug the supplied power cable into the inlet on the back of
the device and then into a power outlet of a suitable voltage.
5.
Turn the power switch on and follow the channel setup
instructions to get the most out of your equipment.
CHANNEL SETUP
1.
To ensure the correct audio level of the input channel is
selected, each of the level input controls of the Mixer should
be turned counterclockwise or down as far as they will go.
2.
No input other than the one being set should have any
device plugged in. This will ensure the purest signal is used
when setting channels.
3.
Set the level control of the channel you are setting to the 0
dB mark.
4.
Ensure the channel has a signal sent to it similar to the signal
that will be sent when in common use. For example, if the
channel is using a microphone, then you should speak or
sing at the same level the performer normally would during
a performance; if a guitar is plugged into the channel, then
the guitar should also be strummed as it normally would be
(and so on). This ensures levels are completely accurate
and avoids having to reset them later.
5.
Set the gain so the Level Meter indicates the audio level is
around 0 dB.
6.
This channel is now ready to be used; you can stop making
the audio signal.
7.
You can repeat the same process for other channels.
Or not, it's your call.
1
Publicidad
Capítulos
Tabla de contenido
