1
5
7c
3
2
9
4
7b
6
7a
8a
8b
8c
6
Camera/Pushrod reel
1 Pushrod Reel: Holds the pushrod on a revolving reel. The pushrod is
up to 150m (500ft) in length.
2 Rod Guide: Guides the rod on and off the reel.
3 Cable Socket: Connector for the link cable.
4 Link Cable: To connect the reel to the controller.
5 Skids: Protect the camera during use and centers the camera in the
pipe. Refer to the operation manual for skid and brush installation.
6 Universal Flexi: Attaches to the end of the pushrod to allow the
camera to negotiate small radius bends.
7 Sonde (7a), flexisondes (7b) and non-detachable Plumbers sonde
(7c) (Plumbers reel only): transmit a signal to allow the position
of the camera to be pinpointed using an RD7100
(optional purchase).
8 Camera: Three color camera options are available:
a. 50mm (2") diameter self-levelling camera for up to 230mm (9")
diameter pipes.
b. 25mm (1") diameter camera for up to 100mm (4") diameter pipes.
c. 32mm (1.23") self-levelling camera.
9 Brake: Can be adjusted to control the reel movement or to lock the reel.
Mains adapter (not shown): Connects the controller to mains power.
Vehicle power lead (not shown): Connects the controller to your
vehicle power socket (12-24V).
Battery pack (not shown): Optional battery pack to allow the use of
the system where mains power is not available.
Controller Clamp (not shown): Allows the controller to be mounted
onto the reel (controller clamp optional on the Mini models).
Environmental specifications
•
Storage Temperature:
-4ºF to 176°F / -20 to 80°C
•
Operating Temperature: 14ºF to 122°F / -10 to 50°C
•
Charging Temperature*: 14ºF to 104ºF / -10ºC to 40ºC
*GatorCam4+ only
•
IP Ratings:
Controller:
IP55 (covers closed)
IP53 (covers open and socket panel closed)
Cameras:
IP68 to 330' (100m) /11bar
WARNING: The mains power and charging cables are not waterproof
and should only be used in dry environments / indoors. The controller
contains an internal battery for IP53-rated weatherproof operation.
™
DL receiver
7