SPX Radiodetection GatorCam4 Guia Del Usuario página 7

Still pictures
Press the key at anytime to take still pictures.
Enter job details if required:
• Review Client Name, Site Address and Survey Start and Finish
Survey references by pressing the
and then press OK again to accept the changes.
• On the keypad, press the
in jpeg format.
You can take screen captures in recording, playback and general
inspection modes. Note that screen captures will also record any
on-screen text, excluding the menu.
Video playback and photo review
To browse your Compact Flash card or USB flash drive, press the video
key on the keypad.
The card browser will open; use the
you wish to view and then press OK or video
Video Playback or Photo review will begin immediately.
You can pause or stop video playback at anytime using the
keys.
You can stop reviewing a photo by pressing the
To Fast-Forward press the arrow key during playback. To resume
normal playback speed, press the video
To Rewind press the arrow key during playback. To resume normal
playback speed, press video .
During playback, you can adjust the sound volume at anytime by pressing
F1 or F2.
Storing your Jobs onto your PC
If you have used a USB flash drive connect this to a spare USB port of
your PC and go to step 4.
Or:
If you have used a CF card:
1 Switch the controller off.
2 Connect the USB cable to the unit and to your computer.
3 Your computer will recognize the unit as a Mass Storage Device.
4 Start FlexiSight manager.
5 Press the Import Button.
6 Select the Removable Disk in which your Jobs are stored.
7 Press OK.
For more information, please refer to the Operation Manual available in the
FlexiSight Manager CD or to download from the Radiodetection website.
and keys. Press OK to Edit
key to capture a picture of the screen
and arrows to navigate to the file
.
or keypad
key or pressing
key.
12
Charging the internal battery (GatorCam4+ only)
WARNING: Use of charging equipment other than supplied by
Radiodetection may compromise the safe operation of the equipment.
WARNING: Only connect the charging equipment to the Internal
battery power connector and charging plug, 14 (see diagram on page 4).
Connection to any other equipment may result in damage both to the
charger and the other equipment.
• Disconnect the Internal battery power connector and charging plug,
14, from the Power Socket, 8 (see diagram on page 4).
• Plug the automotive charger into a vehicle cigarette lighter socket.
Alternatively, if using an optional mains charger, plug that into a mains
socket.
• Connect the output of the charger to the Internal battery power
connector and charging plug
NOTE: You can continue to use the GatorCam4+ system while the
battery is charging by connecting a separate power source (vehicle
supply or mains adapter, both supplied with the GatorCam4+, or an
external battery box option) to the Power Socket.
Maintenance
.
Clean and sanitize the GatorCam4 system at regular intervals and after
conducting an inspection.
The GatorCam4 system contains no user serviceable parts; do not
dismantle any component of the GatorCam4 system, including the
controller, reel and camera.
Radiodetection recommends that only authorized service centers carry out
service of this product. Service elsewhere will invalidate the manufacturer's
warranty.
For information regarding any service needs, please visit:
www.radiodetection.com or contact your local Radiodetection
representative or dealer.
Training
Radiodetection provides training services for most Radiodetection
products. Our qualified instructors will train equipment operators or other
personnel at your preferred location or at Radiodetection headquarters.
For more information go to www.radiodetection.com or contact your local
Radiodetection representative.
13