For Your Safety - Pleasant Hearth OFG112SE Manual De Instrucciones

OPPERATING INSTRUCTIONS
3. Turn the control knob to the O (OFF) Position.
4. Push and turn gas control knob counterclockwise from O (OFF) position past the (IGNITE)
position to the (FLAME) position.
5. After the starter lights, continue to depress the control knob for 30 seconds. You may need to
repeat several times to ignite the burner.
6. If the Starter does not stay lit, turn the control knob to the O (OFF) position. Wait 5 minutes and
repeat step 4 to 5.
7. If after repeating steps 3 to 6, Starter does not light, then
• Turn the control knob to the O (OFF) position and wait 5 minutes.
• Push and turn gas control knob counterclockwise to (FLAME) and continue to depress.
• In the meantime put the match holder close to the burner head to light the starter.
(see illustration).
• After the starter is lit, continue to depress the gas control knob for 30 seconds and release.
CAUTION: Take care not to allow any clothing or hair to drape over the burner when lighting with the match.
Control Knob
WARNING

FOR YOUR SAFETY

Be careful when attempting to manually ignite this
fire pit. Holding in the control knob for more than 10
seconds before igniting the gas will cause a ball of
flame upon ignition.
14