Pleasant Hearth OFG112SE Manual De Instrucciones página 9

ASSEMBLY INSTRUCTIONS
4. Attach Heat Shield Extender (F) by inserting
two M6 x 10mm bolts (AA) through the holes on
the Heat Shield Extender (F) and into the
pre-installed nuts on the back of the Main Heat
Shield (E13). Tighten with a screwdriver.
WARNING: The Heat Shield Extender (F) must
be installed before use to provide proper heat
protection.
Hardware Used
AA
M6x10mm Bolt
5. Turn the unit back to its normal standing
position. Align the L shaped holes on the Door
Panel (I) with the stepped bolts (BB) on the
legs (G) and slide the Door Panel (I) into place
as illustrated.
6. Attach the 2 Cooking Grid Supports (D) to
the firebowl by inserting 2 M6x10mm Bolts (AA)
through the holes in the Cooking Grid Supports
(D) and into the pre-installed nuts in the Firebowl.
Tighten securely with a screwdriver.
Hardware Used
AA
M6x10mm Bolt
4
x 2
5
6
D
x 2
9
AA
F
E13
I
AA