General Information; General Description Of The Machine - Sima EUROTRON PLUS Manual De Instrucciones Original

1. GENERAL INFORMATION

WARNING: Pease read and understand perfectly the present instruction before using the machine.
This manual provides you with the necessary instructions to start, use, maintain and in your case, repair of
the present machine. All aspects as far as the safety and health of the users is concerned have been stated.
Respecting all instructions and recommendations assures safety and low maintenance. As such, reading this manual
carefully is compulsory for any person responsible for the use, maintenance or repair of this machine.
As such, reading this manual carefully is compulsory for any person responsible for the use, maintenance or
repair of this machine.
It is recommended to have always this manual in an easily accessible place where the machine is being
used.
WARNING: Do not cut with the saw other materials (metals, ceramics, plastics, etc...) Should be cut only
wood and chipboard pressing wood particles and waste for which it was designed the machine.
An original electromechanical brake system that requires no maintenance and ensures the immobilization of the disc in
a shorter time than that required by the EEC.
WARNING: IT IS NOT ALLOW use of this machine without the security features that the electrical and
mechanical form, guards, protectors, etc. .., working without safety features, is very risky and can cause
very serious injuries and accidents. Should therefore be strictly followed safety rules recommended in this
Manual as well as labour safety standards in this field in each country, it must be remembered that any change in any
of its parts or elements, or inappropriate use is considered dangerous and unwise.

2. GENERAL DESCRIPTION OF THE MACHINE

 The table saw is a machine whose design and manufacturing has been directed to use wooden cutting boards or
chipboard with steel disc with carbide teeth.
• Cutting height remains constant.
• The transparent protection disc, allows viewing of the cut line. This safeguard is designed to cover the entire disc
surface exposed cutting.
• The cutting disc is driven by electric motor.
• It has handles on the front and rear wheels for easy transport.
• It is equipped with an electric brake motor according to EU rules.
• Start and stop electrical controls, are clearly identified by their colours and satisfy the requirements imposed by EC
rules.
• The legs are built in order to be enabling to fix them to the ground and prevent the rollover.
• The rule that serves as guidance for the cutting, is mounted on a base that allows longitudinal and transverse
positioning for different forms of cutting, this rule has two different height positions in accordance with EC rules.
• As an accessory the machine has a pusher to help cut into pieces of smaller dimensions and a driving device, thereby
avoiding the hands are closer to the disk, the pusher element is built according to CE standards.
3
ENGLISH