Product Safety Information; Product Specifications - Ingersoll Rand 280 Manual De Instrucciones

Product Safety Information

Intended Use:
These Air Impact Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Product Safety Information Manual Form 04580916.
Manuals can be downloaded from ingersollrandproducts.com.
Power Management System
For models that include a power management system, the system allows operator reduction
of maximum output power in the forward direction. The power management system does not
affect the output power in the reverse direction.
To adjust the power, rotate the Power Regulator to the desired level indicator.
The power level indicators are for reference and DO NOT indicate a specific power. The power
output can be further reduced in forward or reverse by using the variable throttle.

Product Specifications

Models Style
Type
280 Grip Square
280-EU Grip Square
Square
280-6 Grip
extended
Square
280-6-EU Grip
extended
Spline
280-S-6 Grip
extended
Models
280
280-EU
280-6
280-6-EU
280-S-6
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
04584918_ed4
Drive
Impacts
per min.
Size
1" 750
1" 750
1" x 6" 750
1" x 6" 750
No. 5 x 6" 750
Sound Level dB(A)
(ISO15744)
† Pressure (L )
p
106.1
106.1
106.1
106.1
106.1
WARNING
Recommended Torque Range
Forward
ft-lb (Nm)
150-1000 (200-1360)
150-1000 (200-1360)
150-1000 (200-1360)
150-1000 (200-1360)
150-1000 (200-1360)
‡ Power (L )
w
117.1
117.1
117.1
117.1
117.1
EN
Reverse
ft-lb (Nm)
150-1000 (200-1360)
150-1000 (200-1360)
150-1000 (200-1360)
150-1000 (200-1360)
150-1000 (200-1360)
Vibration (m/s²)
(ISO28927)
Level *K
24.1 3.4
24.1 3.4
21.8 3.8
21.8 3.8
21.8 3.8
EN-1