Safety Guidelines For Screw Drivers; Safety Guidelines For The Cutting Attachment; Safety Guidelines For Battery Chargers - Parkside PAS 4 C4 Traducción Del Manual De Instrucciones Original

Safety guidelines for screw drivers

WARNING!
■ Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring or its own cord. If a screw comes into
contact with a live wire, this may make ex-
posed metal parts of the power tool live and
could give the operator an electric shock.
Safety guidelines for the cutting
attachment
DANGER!
■ Keep your hands clear of the cutting area
and the cutting blade.
■ Before carrying out any work on the appli-
ance, ensure that the rotation direction switch
is in the middle. This prevents unintentional
switching on.
■ Do not cut unless the blade guard is fully
functional. Defective blade guards will not
protect you against unintentional contact with
the cutting blade.
■ Before each use, check whether the blade
guard is perfect condition and that the cutting
blade is firmly fitted.
■ Always use cutting blades of the correct size
and with an appropriate central fixing bore.
■ 42 │ GB│MT

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and know-
ledge, provided that they are un-
der supervision or have been told
how to use the appliance safely
and are aware of the potential
risks. Do not allow children to
use the appliance as a plaything.
Cleaning and user maintenance
tasks may not be carried out by
children unless they are super-
vised.
The charger is suitable for
indoor use only.
If the connecting cable needs to
■
be replaced, this must be carried
out by the manufacturer or an
official representative in order to
avoid safety hazards.
WARNING! To charge the battery in this appli-
ance , only use the supplied charger .
PAS 4 C4