Items Supplied; Technical Data - Robust RB-JS 400 Manual De Instrucciones Original

Anleitung_RB_JS_400_SPK7__ 18.06.12 11:29 Seite 14
GB
use any aggressive agents for cleaning
purposes.
Check your saw to ensure that it is in good
n
working order. If the saw fails to work properly,
have it checked. Leave all maintenance and
inspection work strictly to a qualified electrician
or ISC GmbH.
Check the fastening screws
n
Check the fastening screws regularly and make
sure that they are all securely tightened. Tighten
any loose screws immediately, otherwise there is
the risk of serious injuries.
Hold the equipment by the insulated handles
n
when carrying out work during which the
plug-in tool could strike concealed power
cables or its own mains lead. Contact with a
live cable can also make the metal parts of the
equipment live and will cause an electric shock.
Do not lose these safety instructions
2. Layout and items supplied (Fig. 1)
2.1 Layout
1. Knurled screw for speed control
2. Locking button
3. ON/OFF switch
4. Allen key
5. Power cable
6. Adapter for dust extraction system
7. Adjustable soleplate
8. Safety guard
9. Dial scale for soleplate
10. Guide roller
11. Screw for soleplate
12. Saw blade
13. Blade holder

2.2 Items supplied

Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
14
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Electronic jigsaw
n
Allen key
n
Adapter for dust extraction system
n
Saw blade
n
Original operating instructions
n
3. Proper use
The jigsaw is designed for sawing wood, iron, non-
ferrous metals and plastics using the appropriate saw
blades.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: 230 V~ 50 Hz
Power input:
Stroke speed: 500 – 3,000 min
Stroke height:
Cutting depth, wood:
Cutting depth, plastic:
Cutting depth, iron:
Miter cut: up to 45° (left and right)
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
400 W
-1
18 mm
55 mm
10 mm
6 mm
II /
1.7 kg