Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
CAUTION
• At least two people shall assemble
the mixer.
• Assemble the mixer in a well-leveled floor that can
support its weight. Use wedges to level the machine in
case it wobbles.
• The mixer is shipped with all the screws and bolts. Use
Allen keys set and the open-end wrenches necessary to
assemble.
1. Set both wheels (A) in the axis structure sides (B).
Fasten both wheels with the pins (C).
CAUTION
Maximum load 300 lb at 25 PSI
2. Set the spring (D) in the release pedal edge (E) and
set the pin (D
) in the lower hole of the pedal, as
1
indicated in the illustration. Pass the drum lock (F)
through the frames (G). Assemble the drum support (H)
in the leg (I) and the wheels structure (J).
3. Use four sets of M8 x 70 bolts, washers, pressure
washers and nuts to fasten el drum support elements.
Use a M6 x 25 bolts set and nuts to join the end of the
release pedal and the drum lock.
C
G
F
D
E
I
B
1
A
H
J
2
D
1
3
ENGLISH
7
Publicidad
Capítulos
Tabla de contenido
