Resetting To Default Settings - wtw pH 340i Instrucciones De Operación

pH/Oxi 340i
Measurement
parameters
Configuration
parameters
pH
i n i

Resetting to default settings

You can reset the measurement parameters and the configuration to the de-
livery status separately from one another (initialization).
The following measurement parameters (pH/O
ery status:
pH/ORP (pH InI)
Measuring mode
Asymmetry
Slope
Oxygen (O InI)
2
Measuring mode
Relative slope
Salinity (value)
Salinity (function)
The following configuration parameters (InI) can be reset to the delivery sta-
tus:
Baud rate
Display during pH calibration
Interval 1
(automatically saved)
Interval 2
(for data transmission)
Procedure of the reset:
l To switch it off, press <CAL> while pressing the <RUN/ENTER> key.
l To reset the measurement parameters with < > < >, select YES and
confirm with <RUN/ENTER>, or
n o
l continue with the next parameters without a reset with the <RUN/EN-
TER> key (O
l After the configuration parameters, InI changes the instrument to the last
active measurement mode.
InI > InI).
2
Resetting to default settings
InI) can be reset to the deliv-
2
pH
0 mV
-59.16 mV
D. O. concentration
1.00
0.0
off
4800
Buffer nominal value
OFF
OFF
13