KitchenAid KTDM354D Instrucciones Para El Usuario página 10

OPTION SELECTIONS
OPTIONS
Raises the main wash
temperature to improve
cleaning for loads containing
tough, baked-on food.
Sanitizes dishes and
glassware in accordance
with NSF International NSF/
ANSI Standard 184 for
Residential Dishwashers.
Certified residential
dishwashers are not
intended for licensed food
establishments. Only
sanitizing cycles have been
designed to meet the
requirements of the NSF/
ANSI 184 performance
standard for soil removal and
for sanitization efficacy.
There is no intention, either
directly or indirectly, that all
cycles on a NSF/ANSI 184
certified dishwasher meet
the NSF/ANSI 184
performance standard for
soil removal and for
sanitization efficacy.
The Sani Rinse indicator
glows at the end of the cycle
if the Sani Rinse option was
successfully completed. If
the indicator does not
activate, it is probably due to
the cycle being interrupted.
For added convenience, use
for washing a small load of
dishes in the top rack to
help keep the kitchen
continuously clean.
Runs the dishwasher at a
later time or during off-peak
electrical hours. Select a
wash cycle and options.
Press the Delay button.
Press START/RESUME.
Close the door firmly.
NOTE: Anytime the door is
opened (such as, to add a
dish), the Start/Resume
button must be pressed
again to resume the delay
countdown.
Avoids unintended use of the dishwasher between cycles or cycle and option changes during a cycle.
To turn on Lock, press and hold TOP RACK ONLY for 3 seconds. The Top Rack Only/Control Lock light will stay on for
a short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher
is locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
NOTE: You may need to disable Sleep mode by pressing either Start/Resume or Cancel/Drain or by opening
and closing the door before you are able to turn Control Lock off.
To turn off Control Lock, press and hold TOP RACK ONLY (Control lock hold 3 seconds) for 3 seconds. The light
turns off.
10
CAN BE WHAT IT DOES
SELECTED WITH
Tough Raises the main
wash temperate from
Normal Wash
105°F (41°C) to either
130°F (55°C) or
140°F (60°C).
Tough Increases the main
wash temperature
Normal Wash
from 105°F (41°C)
to 140°F (60°C) and
the final rinse from
140°F (60°C) to
155°F (68°C).
Available with Slightly faster wash
for smaller loads
any cycle
Available with Delays the start
of a cycle to the
any cycle
specified time
ADDED TIME TO CYCLE
TYPICAL
40
72
- 3
240
.
ADDED
WATER
MAX
GALLONS
(LITERS)
50 0 - 1.5
(0 - 5.7)
85 0 - 1.5
(0 - 5.7)
-40 0
480 0