LEGRAND Wattstopper SW-301 Instrucciones De Instalación página 4

DSW-301 and DSW-301-347 Wiring
Black
Line
Green
Ground
Neutral
For applications requiring neutral wiring, remove tab as shown to expose terminals for wiring.
NOTE: When used in a multi-way application, all devices in that space must be wired using
the same method of either with neutral or without neutral.
The Multi-Way capability is available on all models. Sensors can easily be
wired together for convenient control of a common load. When wiring this
way, only use 300 series sensors. Multi-Way in 300 series is not compatible
with prior sensor models.
The following princlples apply for Multi-Way:
• All units should be on the same phase.
• All units can see each other's push button events and respond
accordingly.
• All units can see each other's PIR trigger event. The response will be
determined by the Light Level setting and/or conditions of the space of
the detecting sensor.
• The time delay for all units is defined by the unit with the smallest time
delay.
Two-phase Wiring
Neutral
Line 1
Line 2
Black
Red
Blue
Yellow
Brown
Green
Neutral
(optional)
Ground
Neutral
DSW-302 and DSW-302-347 Bi-Level Wiring
Black
Line
Red
Load
Yellow
Neutral
Green
(optional)
Ground
Neutral
OPTIONAL NEUTRAL WIRING
Black
Red
Blue
Brown
Green
Neutral
(optional)
Ground
NOTE: Button 1 on any sensor controls load #1,
and button 2 on any sensor controls load #2.
Primary
Red
Load
Blue Yellow
Secondary
Brown
Load
Neutral
(optional)
MULTI-WAY
Ground
Neutral
Line
Black
Primary
Blue
Load
Secondary
Load
Green
Ground
Neutral
4
DSW-302 and DSW-302-347 Dual Circuit Wiring
Neutral
Black
Line 1
Blue
Line 2
Green
Ground
Neutral
Yellow
Red
Breakaway
tab
Typical Wiring
(DSW-301 or DSW-301-347 up to 4 sensors)
Line
Black Red
Yellow
traveler
Neutral
Green
(optional)
Ground
Bi-level Wiring
(DSW-302 or DSW-302-347 up to 4 sensors)
Red Black
Blue
Yellow
Brown
Green
Neutral
(optional)
Ground
Primary
Red
Load
Yellow
Secondary
Brown
Load
Neutral
(optional)
8" flying leads for line,
load, ground and
multi-way connections
DSW-302 shown.
The DSW-301 does
not include these
two leads
Blue
Brown
Black
Optional neutral terminals
behind breakaway tab
Green
Black Red
Load
Yellow
Neutral
Green
(optional)
Red Primary
Load
Brown
Secondary
Load
Neutral
(optional)