Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
mon amie skin sensor
(terminal)
SENSOR-TEST
Perform a test of the melanin sensor. The values read
by the sensor can be read directly.
PIN II
1. Invoke the
easyCare
2. Select
0 (minus button).
3. Press START to go to the submenu and select
TEST
by pressing 5 (plus button) or 0 (minus
button).
4. Press the sensor onto the skin in order to start
the test.
5. Press STOP to leave the menu.
Querying software info
Select the menu item
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
PIN II
1. Invoke the
2. Press 5 (plus button) or 0 (minus button) to select
VERSION
.
3. Press START to display the version information.
Download information
The menu items
II/fi.Download
la.Download)
(
software download.
PIN II
1. Invoke the
la.Download
2. Select
pressing 5 (plus button) or 0 (minus button).
3. Press
the
START
corresponding information.
28
M a n u a l d e i n s t r u c c i o n e s | mon amie
menu.
by pressing 5 (plus button) or
PIN II/VERSION
menu and enter the PIN.
PIN II/la.Download
indicate time and date of the latest
fi.Download)
or of the fi rst (
menu and enter the PIN.
fi.Download
or
button
to
display
Setting the operating hours of
the tubes
The operating hours of the tubes must be reset when
replacing the control board or adjusted accordingly
when utilizing used tubes!
Go to the menu item
want to enter the operating hours of the UV tubes. Go
to the menu item
to enter the operating hours of the collagen tubes.
1. Invoke the
2. Select
0 (minus button).
3. Press START to invoke the selected menu item.
4. Enter the desired value by pressing 5 (plus button)
and 0 (minus button).
5. Save the settings by pressing START and exit the
menu using the STOP button.
to display
PIN
and
by
the
PIN II/xxxxxh T.UV
PIN II/xxxxxh T.Co
PIN II
menu and enter the PIN.
T.Co
T.UV
or
by pressing 5 (plus button) or
if you
if you want
Publicidad
Tabla de contenido
