Items Supplied; Using Extension Cords - Hilti TE 500-AVR Manual De Instrucciones Original

Status
The service indicator blinks.

3.6 Items supplied

Breaker, side handle, operating instructions.
Note
You can find other system products approved for your product at your
local Hilti Center or online at: www.hilti.group.
4 Technical data
4.1 Breaker
Note
For details of the rated voltage, frequency, current and input power,
please refer to the power tool's country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
Weight

4.1.1 Using extension cords

WARNING
A damaged supply cord presents a hazard! Do not touch the supply
cord or extension cord if damaged while working. Disconnect the supply
cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it
replaced by a qualified specialist if found to be damaged.
• Use only extension cords of a type approved for the application and
with conductors of adequate gauge (cross section). The power tool
may otherwise suffer a drop in performance and the extension cord may
overheat.
• Check the extension cord for damage at regular intervals.
• Replace damaged extension cords.
• When working outdoors, use only extension cords that are approved and
correspondingly marked for this application.
Printed: 09.08.2017 | Doc-Nr: PUB / 5367058 / 000 / 01
Meaning
• The product is faulty. Have the
product repaired by Hilti Service.
TE 500­AVR
13.9 lb
(6.3 kg)
English 7