Usb Connection; Items Supplied - Hilti SI­-AT-­A22 Manual De Instrucciones Original

Status
The LEDs flash yellow.
3.6 Buzzer
The buzzer in the adaptive torque module emits the following signal tones
as audible feedback:
• Long buzz: Confirmation signal (OK / operation completed successfully)
• 2 short buzzes, the LEDs flash yellow: Warning 1 (OK or, as applicable,
not OK / repeat tightening)
• 4 short buzzes, the LEDs flash red: Warning 2 (not OK / operation aborted)

3.7 USB connection

The USB port can be used to connect the adaptive torque module to a PC.
When this connection is made, the AT Documentation Software offers a
range of functions, including:
• Adding new data records for new fasteners
• Changing / updating existing data records
• Deactivating / activating the documentation function
• Loading the log from the documentation function
• Setting the clock in the torque module
Note
Further information can be found in the documentation for the
AT Documentation Software.

3.8 Items supplied

Adaptive torque module, operating instructions, quick-start guide, USB
cable.
Other system products approved for use with this product can be found at
your local HILTI STORE or online at: www.hilti.group | USA: www.hilti.com.
4 English
Printed: 15.09.2017 | Doc-Nr: PUB / 5331558 / 000 / 01
Meaning
• The module detected that the
threaded fastener had been tight-
ened and subsequently slack-
ened. Consequently, the threaded
fastener has been retightened in
accordance with defined param-
eters for retightening, and the
tightening operation has been
completed successfully.